Anti-Crease - Miele T 4819 Ci Operating Instructions Manual

Anti-crease

Anti-crease helps prevent creasing, if
laundry is not normally removed im-
mediately after the end of a
programme.
The anti-crease function
– is activated when the tumble dryer is
delivered. You can shorten the
duration of the anti-crease phase or
deactivate it if wished.
– is used in all programmes except
Woollens handcare.
– should be left activated.
Follow the steps ( , ,
programme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
Press the Start/Stop button and keep
it pressed in whilst carrying out steps
- .
Switch the dryer on.
Wait until the Start/Stop button lights up
constantly . . .
. . . and then release the Start/Stop
button.
Press the Low temperature button
twice.
– The Low temperature indicator light
will flash 3 times briefly.
A number to show which option is
selected will appear in the display
alternating with the letter P.
0 Anti-crease off
i 1 hour anti-crease
2 2 hours anti-crease
...) to
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
^ Carry out steps
^ Switch the dryer off after step
Programmable functions
(the Automatic plus indicator light will
also flash once).
(factory default setting)
(the Automatic plus indicator light will
also flash twice).
Pressing the Start/Stop button
switches between the options.
Switch the dryer off.
to .
.
57