Cannot Scan Over A Network; Solving Copying Problems - Epson XP-211 User Manual

Related tasks
Printing a Network Status Sheet

Cannot Scan Over a Network

If you cannot start Epson Scan for scanning over a network, try these solutions:
• If you are scanning a large original at a high resolution, a network communication error may occur. Try
scanning again at a lower resolution.
• If network communication was interrupted while starting Epson Scan, exit Epson Scan, wait a few
seconds, and restart it. If Epson Scan cannot restart, turn off your product, turn it back on, and try
restarting Epson Scan again.
• Check the connection setting and test the connection using Epson Scan Settings:
Windows 8: Navigate to the Start screen and select EPSON Scan Settings. Make sure the
Connection setting is set to Network, then click the Test button.
Windows (other versions): Click
Scan > EPSON Scan Settings. Make sure the Connection setting is set to Network, then click the
Test button.
Mac OS X: Open the Applications folder, click Epson Software, and click EPSON Scan Settings.
Make sure the Connection setting is set to Network, then click the Test button.
• Make sure the option selected as the Timeout Setting in the Epson Scan Settings program is long
enough to complete scanning over a network.
• You may need to disable the firewall and any anti-virus software on your wireless router or access
point.
Parent topic:
Related concepts
Scan Resolution Guidelines
Related topics
Scanning

Solving Copying Problems

Check these solutions if you have problems copying with your product.
Product Makes Noise, But Nothing Copies
Copies are Cut Off
or Start > All Programs or Programs > EPSON > EPSON
Solving Network Problems
146