2.7.6 POWER SUPPLY CORD
The power supply cord must comply with all applic-
able codes, standards and regulations. It must be
large enough to handle the full amperage to which it
will be subjected.
PRIMEPACT 50 Recreational Vehicle Generator
Figure 2.18 – Transfer Switch Isolation Method
Figure 2.19 – Installation With Isolation Receptacle
Section 2 – Installation
2.7.7
GROUND FAULT CIRCUIT INTERRUPTERS
The National Electrical Code (NFPA 70, 551-7)
requires that you install ground fault circuit inter-
rupters (GFCIs) on all external and some internal
electrical receptacles. Contact your manufacturer or
dealer for recommendations.
Generac
®
Power Systems, Inc. 33
Need help?
Do you have a question about the 02010-2, 04164-2 and is the answer not in the manual?