Roland M-300 Owner's Manual Addendum page 4

About the Wireless LAN Function
Basic Connection Method
The first time you connect the M-300 to a wireless network, you will need to perform the following procedure (WPS) to join the
wireless network.
* This procedure is required only once. Once you have joined the network, this procedure will no longer be necessary.
What is WPS?
WPS is a standard that makes it easy to make security settings when connecting to a wireless LAN access point. We recommend
that you use WPS when connecting to a wireless LAN access point.
1.
Connect WNA1100-RL
Insert the wireless USB Adaptor (WNA1100-RL; sold separately) into the M-300's USB MEMORY port.
fig.connect-WNA1100RL.eps
2.
Call up the SYSTEM screen
Press [SYSTEM] button in SETUP section to call up the SYSTEM screen.
3.
Call up the REMOTE popup
Press the [F4 (REMOTE)] to call up the REMOTE popup.
fig.remote-popup.eps
4.
Open the WIRELESS LAN tab
Press [F6 (WIRELESS LAN)] to open WIRELESS LAN tab.
fig.wireless-LAN-tab.eps
4