Table of Contents
Advertisement
-
Gem/n/
User's
Manual
A
"Back Pass"
.
.
"Bottom Pass"
:
.
.
loadlng
:
Figure 2-13.
Whether you use the "bottom pass" (shown here) or the
"back pass" option (also shown), you start and end with the same steps.
13.
Adjust the paper so that it will feed through
straight, and push the paper press back to
its operational position.
14.
Horizontally
adjust
the
sprocket
mechanisms right or left so they align with
the sprocket holes on the paper.
15.
Vertically turn the sprocket "teeth"
(the
little nubs on the sprocket wheels) so they
line up with the holes on the paper.
16.
Snap the clamp
levers back into the
"closed"
position.
30
Advertisement
Table of Contents
