Specifications - Gemini Printer User Manual

Gemini User's Manual
TECHNICAL SPECIFICATIONS
.*
The following table provides a summary of the technical specs for
the Gemini-lox and the Gemini-15X. If you understand all of it,
great! If you don't, that's okay, too. Either way, by the time you
finish reading this manual, you should know more than enough
to use your printer to its full potential.
Note: The technical specifications of the Gemini printers are
subject to change without notice.
Printer:
Print head:
Print speed:
Print buffer:
Character matrix:
Character sets:
Character fonts:
Special features:
10
Serial impact dot matrix
9 wire (user replaceable)
120 CPS (at 10 CPI)
bidirectional logic seeking. Graphics mode:
unidirectional
-.
-
816 bytes (expandable up to 4K or 8K)
9 x 9 standard with true descenders
18 x 9 emphasized
18 x 18 double strike
6 x 6 block graphics
60 x 72 low-resolution bit-image graphics
120 x 144 high-resolution bit-image graphics
240 x 144 ultra-high-resolution bit-image graphics
-
96 standard ASCII characters
96 italic characters
64 special characters
32 block graphic characters
96 Downloadable characters (programmable)
88 International characters (selectable)
Normal (10 CPI)
Elite (12 CPI)
Condensed (17 CPI)
Emphasized
Double strike
Enlarged (5, 6, 8.5 CPI)
Super/subscripts
Italic
'rl -
-
Self-Test
Continuous underline
Backspace
Vertical, horizontal programmable tabs
Left and right margin set
7 or 8-bit selectable interface
Bit image column scan
Perforation skip
Downloadable characters (programmable)
Macro instruction
-
-
-