Table of Contents
Advertisement
.
c
Paper
and Ribbon
13.
Rotate the platen knob and check to
see if the roll paper is feeding smoothly.
If some adjustment
is needed, pull the
release lever forward
to the "open"
mode again, and adjust the placement
of the paper
before
"closing"
the
release lever.
14.
Set the print-start position to where you
want to begin printing on the roll.
15.
Turn the power switch
to the "on"
position.
Figure 2-6.
After the roll paper has been inserted and the various
mechanisms
set in their proper places (steps 70- 12), you can turn the
platen knob to adjust the roll paper vertically.
Note: If you encounter any problem finding suitable roll-paper
supplies, contact your Gemini dealer.
21
Advertisement
Table of Contents
