Table of Contents
Advertisement
introduction
GEMINI'S
OPERATING
ENVIRONMENT
When you install your Gemini printer, you should use common
sense and good judgment about where you place it. The following
are worthy of consideration
in evaluating a potential operating
environment:
Position Gemini horizontally on a level surface.
Pick a place that does not have
extremes in temperature
(very hot or very cold)
strong vibrations
dusty atmosphere
oil present
metal particles nearby.
Avoid placing Gemini where it will be exposed to
direct sunlight,
or close to a heater or heat-
generating applicances.
Provide a separate power supply, away from
noise-generating
motors.
The power supply must not be more than 10%
more or less than 120 volts A.C., 220 volts
A.C., or 240 volts A.C.
(as specified
on the
product identification
plate).
Note: Extremely
high or low voltage will cause printer printer
problems.
The Gemini printers are valuable information-handling
tools.
These tips will help you pick a good setting for the Gemini. Chapter
10 provides maintenance suggestions for keeping your printer in
good working order.
9
Advertisement
Table of Contents
