Gemini Printer User Manual page 34

Gemini User's Manual
Paper separator,
Figure 2-l 1. The first step is to prepare the Gemini-75X by putting the
mechanical controls in the "open"position.
Stepsg-12leadyoudown twoseparatepaths:Steps9A through
12A are for loading sprocket paper from "behind" the printer; steps
9B through 12B instruct you on loading paper from "beneath" the
Gemini-15X.
9A.
Place the stack of fanfolded computer
paper behind the printer.
10A. Insert the sprocket paper from the back of
the printer (as shown in Figure 2-12).
11A. Feed the top sheet between the paper
chute and the platen cover, and around the
platen to the front.
12A. Push the paper up past the paper press,
and return the paper separator to its
horizontal position.
26
-