Making Espresso Or Long Coffee Using Pre-Ground Coffee; Making Drinks With Milk; Filling And Attaching The Milk Container; Making Caffelatte - DeLonghi ESAM 6700 Instruction Manual

1. Fill the container with coffee beans (fig. 12).
2. Adjust the height of the spout according to the
cup used. Put the cup for long coffee under
the spouts (fig. 18);
3. Press the LONG icon (fig. 10). Preparation
begins. A progress bar appears on the display
and gradually advances as the procedure pro-
gresses.
N.B.!
• While the machine is making coffee, delivery
can be interrupted at any moment by pressing
the LONG icon.
• Only one cup of long coffee can be made at a
time.
• When delivering more than 125 ml, the
appliance automatically grinds more coffee
halfway through delivery.
Making espresso or long coffee
using pre-ground coffee
Important!
• Never add pre-ground coffee when the machi-
ne is off or it could spread through the inside
of the machine and dirty it.
• Never use more than one level measure or it
could dirty the inside of the machine or block
the funnel.
N.B.! If you use pre-ground coffee, you can
only make one cup of coffee at a time.
1. Press the icon repeatedly (fig. 7) until
"Pre-ground" flashes on the display.
2. Put one level measure of pre-ground coffee
into the funnel (fig. 19).
3. Place a cup under the coffee spouts..
4. To make espresso coffee, press the one cup
icon (fig. 9).
To make a long coffee, press the LONG icon
(fig. 10).
N.B.! LONG COFFEE: when delivering
more than 125 ml, the appliance requests a new
level measure of pre-ground coffee halfway
through delivery. When you have added the pre-
ground coffee, confirm by pressing the OK icon.
MAKING DRINKS WITH
MILK
Filling and attaching the milk
container
1. Turn the lid of the milk container clockwise
until it becomes noticeably difficult to turn,
then remove the lid (fig. 20).
2. Riempire il contenitore latte con una quantità
sufficiente di latte, non superando il livello
MAX impresso sull'impugnatura (fig. 21).
N.B.! Do not use full fat milk. Use skim-
med or semi-skimmed milk at refrigerator tempe-
rature (about 5°C).
To avoid milk with poor froth or large bubbles,
always clean the milk lid and hot water nozzle as
described in the section "Cleaning the milk contai-
ner" on pages 17 and 19.
3. Make sure the milk intake tube is correctly
inserted in the bottom of the milk container lid
(fig. 22).
4. Replace the milk container lid and turn anti-
clockwise as far as it will go.
5. Remove the hot water spout from the nozzle
(fig. 23).
6. Attach the container to the nozzle and push as
far as it will go (fig. 24). The machine emits a
beep (if the beep function is enabled).
7. Place a sufficiently large cup under the coffee
spouts and frothed milk spout.
To use particularly tall cups/glasses, raise the
lid of the special compartment in the cup tray
(fig. 25).

Making caffelatte

1. After attaching the milk container, position the
frothed milk regulator on CAFFELATTE (fig.
26) printed on the milk container lid.
2. 2. Press the CAFFELATTE icon (fig. 27).
The message "Caffelatte... Jug pointer in posi-
tion: 3" appears. After a few seconds, frothed
milk is delivered from the milk spout into the
cup below. The milk will stop automatically
and delivery of coffee will begin.
N.B.! If during delivery you want to stop
preparing milk, press the CAFFELATTE icon or
interrupt preparation of the coffee by pressing the
icon.
35
GB