HOW TO START UP THE CONDITIONER
(see control panel on the opposite page)
AIR-CONDITIONING
The Min. speed warning
light comes on.
Move the cursor to maxi-
mum cold position. The air-
cooling signal lamp comes
on. (When the room
tempeture has reached the
desired level, move the slid-
ing thermostat control
gradually to the min. posi-
tion: the unit switches off
and the conditioning sig-
nal lamp start to flash).
Press the "Air-conditioning"
key again to increase fan
speed. The Max. speed
warning light comes on.
Plug the appliance into the mains.
The signal lamp will come on
Press the ON/OFF key.
The function signal lamps flash and the
out.
Press the key for the function required:
AIR-COOL. KEY = Air-conditioning
HEAT. KEY
= Heating
AUTO. KEY
= Automatic climatization
(air-conditioning or heating)
HEATING
The Econ signal lamp
comes on (economic elec-
tric heating 1300W)
Move the cursor to maxi-
mum hot position. The heat-
ing signal lamp comes on.
(When the room tempeture
has reached the desired
level, move the sliding ther-
mostat control gradually to
the min. position: the unit
switches off and the heat-
ing signal lamp start to
flash).
Press the "Heating" key
again to obtain Max. power.
The Max. heat warning light
comes on.
Select either the "Programmed" or "Non-programmed" mode
(see pg. 26)
The appliance comes on
If not, refer to pg. 30
To switch off the appliance,
press the Power push-button.
.
signal lamp goes
AUTOMATIC
The appliance automati-
cally selects heating (when
it is too cold), air-condi-
tioning (when it is too hot)
or remains switched off
One of the signal lamps will
come on, depending on the
function selected by the
microcomputer.
27