Operating Instructions - Electrolux EHI635BD Installation & User Manual

12 electrolux.com.au

OPERATING INSTRUCTIONS

On and off
Touch for 1 second to activate or deactivate the
appliance.
Automatic switch off
The function deactivates the appliance automatically if:
• All cooking zones are deactivated (
• You do not set the heat setting after you activate the
appliance.
• You spill something or put something on the control
panel for more than 10 seconds, (a pan, a cloth, etc).
An acoustic signal sounds after some time and the
appliance deactivates. Remove the object or clean the
control panel.
• The appliance becomes too hot (e.g. when a
saucepan boils dry). Before you use the appliance
again, wait for the cooking zone to cool down.
• You use incorrect cookware. The symbol
on and the cooking zone deactivates automatically
after 2 minutes.
• You do not deactivate a cooking zone or change the
heat setting. After some time
appliance deactivates. See the table below.
Automatic switch off times
Heat setting
Stops after
The heat setting
Touch the control bar at the heat setting. Change to the
left or the right, if it is necessary. Do not release before you
have a correct heat setting. The display shows the heat
setting.
).
comes
comes on and the
6 hours 5 hours
Bridge function
IMPORTANT!
Use the Bridge Function with the
Infinite Plancha accessory
The Bridge Function connects the two left side cooking
zones under the accessory and they operate as one.
First set the heat setting for one of the cooking zones.
To activate the Bridge Function, touch
the heat setting, touch one of the control sensors. To
deactivate the Bridge Function, touch
zones operate independently.
4 hours
.
1)
To set or change
The cooking
1.5 hours