Personality; Mode Priority; Auto Select - Canon image runner 2545i Printer Manual

Personality

Auto, PCL, PS
This setting enables the machine to process data received from the host computer in the
specified data format. Setting the 'Personality' to [Auto] makes the machine determine the
type of data received from the host on a job-by-job basis. If you are printing from applications
on a computer, we recommend that you use the [Auto] setting.
NOTE
• The Personality function is available only when the PCL Printer Kit-AF1 (optional for
the imageRUNNER 2545/2535/2530/2525/2520) and PS Printer Kit-AF1 (optional for
3
the imageRUNNER 2545/2535/2530/2525/2520) are activated.
• If the machine does not correctly switch to the appropriate personality when
'Personality' is set to [Auto], change the setting manually to match the data you are
sending from the host computer.

Mode Priority

Off, PCL, PS
This setting determines which personality should be used if a job is received without a
specified command language. 'Mode Priority' is available only when 'Personality' is set to
[Auto].
[Off]:
[PCL]:
[PS]:

Auto Select

PCL: On, Off
PS: On, Off
This setting determines which personality should be used when [Auto] is selected in the
Personality setting.
If [On] is selected in each mode, the mode is available for the Personality setting.
If [Off] is selected in each mode, the mode is not available for the Personality setting.
3-18
Settings Menu
Applies the current Personality setting if the machine cannot detect a
command language.
Assigns priority to the PCL personality.
Assigns priority to the PS personality.