Programme Has Started; At The End Of The Programme - Electrolux EWF934 EWF734 Instruction Booklet

14.How to open the door after the

programme has started

First set the machine to PAUSE by pressing the
START/PAUSE button.
If the door does not open, this means that the
machine is already heating, that the water level is
above the bottom edge of the door or that the drum
is turning.
If you cannot open the door but you need to open it
you have to switch the machine off turning the
selector dial to 0 . After about 3 minutes the door can
be opened (pay attention to the water level and
temperature!). To restart the programme switch on
the machine and select again the desired
programme and options.

15. At the end of the programme

The washing machine stops automatically.
If the Rinse hold option has been selected, the
light of the START/PAUSE button goes off, and
remain lit, to indicate that the water
must be drained before opening the door. The
display shows a flashing zero.
Turn the programme selector dial to Reset "O" to
switch the machine off.
Remove the laundry from the drum and carefully
check that the drum is empty so as to avoid any
forgotten items being damaged in a subsequent
wash (e.g. shrinking) or their colour running into a
load of whites.
If you do not intend to carry out another wash, close
the water tap.
Leave the door open to prevent the formation of
mildew and unpleasant smells.
19