Table of Contents
Advertisement
Installing more than one
Frontline hob
Additional parts: cross bar(s), heat re-
sistant silicon, rubber block, shaving
blade.
Only use special heat-resistant sili-
con.
Cut-out section
Distance from the wall: at least 50
mm
Depth:490 mm
Width: The widths of all appliances to
be built-in are added together, minus 20
mm (see also "Overview of all appliance
widths")
Example:
Installing more than one appliance
1. Work out the size of the cut-out sec-
tion and saw it out.
2. Remove Frontline strip from the ap-
pliances by hand (magnetic fasten-
ing).
installing more than one frontline hob electrolux 23
3. Lay the appliances one at a time on
something soft (for example a blan-
ket) with the underside facing up-
wards.
4. Screw / clip fixing plates / retaining
grips into the appropriate holes in the
protective boxes.
Advertisement
Table of Contents
