Table of Contents
Advertisement
Gas connection
• The 1/2'' gas connection pipe is lo-
cated on the left-hand side of the
back of the appliance.
• Burner rail end piece with nut (1),
gasket (2) and adjustable fitting (3)
are to be assembled as illustrated.
• It is recommended that a gas safety
socket is used.
• The connection can be permanent
or using a permitted gas safety hose
assembly with a socket.
• The hose assembly must be posi-
tioned such that it is not in contact
with anything and must not come
into contact with a moveable part of
the built-in unit (e.g. drawer).
• The gas hob can be changed over to
other types of gas. Conversion kits
for other gas types are available in
specialist shops.
Cutting the seal to length
• A sealing tape is stuck to the under-
side of the appliance. The two ends
overlap and must be cut off flush.
Warning!
After installation always check the tight-
ness of the connections using a soap
solution. Never use a flame to check
the tightness.
Using the appliance for the first time
• Ignite each ring burner and test
burning stability at maximum and
minimum power.
installation instructions electrolux 19
Advertisement
Table of Contents
