Table of Contents
Advertisement
Menu Operations and Menu List
AUDIO Menu
Here you make settings related to audio effects.
fig.audio-mix-menu.eps
1-4
5-8 INT MIC
REVERB
REVERB SEND
MASTERING
46
HIGH PASS / IN 1
HIGH PASS / IN 2
HIGH PASS / IN 3
HIGH PASS / IN 4
NOISE GATE / IN 1
NOISE GATE / IN 2
NOISE GATE / IN 3
NOISE GATE / IN 4
EQ Lo (dB) / IN 5/6
EQ Hi (dB) / IN 5/6
EQ Lo (dB)/ IN 7/8
EQ Hi (dB)/ IN 7/8
EQ Lo (dB)/ INT MIC
EQ Hi (dB)/ INT MIC
HIGH PASS / INT MIC
NOISE GATE / INT MIC
REVERB SW
REVERB TYPE
REVERB TIME
REVERB DAMP
REVERB LEVEL
REVERB SEND / IN1
REVERB SEND / IN2
REVERB SEND / IN3
REVERB SEND / IN4
REVERB SEND / IN5/6
REVERB SEND / IN7/8
REVERB SEND / INT MIC
MASTERING FX SW
NOISE SUPPRESSOR
ENHANCER
MASTER Lo
MASTER Hi
This switches the high-pass filter for channel 1 on and off.
This switches the high-pass filter for channel 2 on and off.
This switches the high-pass filter for channel 3 on and off.
This switches the high-pass filter for channel 4 on and off.
This adjusts the degree of noise gate applied on channel 1.
This adjusts the degree of noise gate applied on channel 2.
This adjusts the degree of noise gate applied on channel 3.
This adjusts the degree of noise gate applied on channel 4.
This adjusts the degree of lo (low-band) EQ applied on channels 5/6.
This adjusts the degree of hi (high-band) EQ applied on channels 5/6.
This adjusts the degree of lo (low-band) EQ applied on channels 7/8.
This adjusts the degree of hi (high-band) EQ applied on channels 7/8.
This adjusts the degree of lo (low-band) EQ applied for the internal mic.
This adjusts the degree of hi (high-band) EQ applied for the internal mic.
This switches the high-pass filter for the internal mic on and off.
This adjusts the degree of noise gate applied for the internal mic.
This switches reverb on and off.
This selects the reverb type.
This adjusts the sustain time for reverb.
This adjusts the decay time for reverb.
This adjusts the degree of mixing for reverb sound.
This adjusts the amount of reverb send on channel 1.
This adjusts the amount of reverb send on channel 2.
This adjusts the amount of reverb send on channel 3.
This adjusts the amount of reverb send on channel 4.
This adjusts the amount of reverb send on channel 5/6.
This adjusts the amount of reverb send on channel 7/8.
This adjusts the amount of reverb send for the internal mic.
This switches mastering effects on and off.
This adjusts the degree of application of the noise suppressor.
This adjusts the degree of application of the enhancer.
This suppresses distortion in the low band (220 Hz and lower).
This suppresses distortion in the high band (2 kHz and higher).
Hide quick links:
Advertisement
Table of Contents
