Advertisement
QuickSpecs
Standard Features
Interfaces
Industry Standard
Compliance
Operating Systems
Support for HP ProLiant
Workstations
Micro SDHC Slot
USB 2.0 Port
NOTE: The above options are for integrated hypervisor virtualization environments needing a low cost
boot solution with the highest performance and reliability.
NOTE: The internal USB 2.0 Port is not available when the HP 24GB (1x24GB) Three Rank x4 PC3L-10600R
(DDR3-1333) Registered CAS-9 Low Voltage FIO Memory Kits (700404-B21) are used.
ACPI 2.0
Microsoft® Logo certifications
USB 2.0 Support
IMPI 2.0
Secure Digital 2.0
TMP 1.2 Support
IEEE (specific IEEE standards dependant on Ethernet adapter card(s) installed)
Advanced Encryption Standard (AES)
Triple Data Encryption Standard (3DES)
SNMP
SSL 2.0
DMTF Systems Management Architecture for Server Hardware Command Line Protocol (SMASH CLP)
Active Directory v1.0
PCIe 3.0
Client Operating Systems:
Microsoft ® Windows 7® Professional (64-bit)
Server Operating Systems:
Red Hat Enterprise Linux 5.8+ (64-bit only) ; HP Supported, partner certification pending
Red Hat Enterprise Linux 6.2+ (64-bit only) ; HP Supported, partner certification pending
Citrix XenDesktop 5.6fp1
Citrix XenServer 6+ Enterprise editions
VMware Horizon View 5.2, vSphere 5.1 or later
Microsoft Windows Server
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization
Software and latest listing of software drivers available for your server, please visit our Support Matrix at:
http://www.hp.com/go/ossupport
http://www.hp.com/support/WS460cGen8
DA - 14409 North America — Version 16 — December 13, 2013
HP ProLiant WS460c Gen8 Workstation Blade
One (1) internal Micro Secure Digital High Capacity (Micro SDHC) card slot
One (1) internal USB 2.0 connector for USB flash media drive keys
and our driver download page
Page 9
Advertisement
