Electrolux EBSL6 User Manual page 16

16 electrolux
2. Pull the rear shelf support rail away from
the side wall and remove it.
2
1
Installing the shelf support rails
Install the shelf support rails in opposite se-
quence.
The rounded ends of the shelf support
rails must point to the front!
Oven lamp
Warning! There is a danger of
electrical shock!
Before you change the oven lamp:
• Switch off the oven.
• Remove the fuses in the fuse box or
switch off the circuit breaker.
Put a cloth on the bottom of the oven
for protection of the oven light and
glass cover.
Replacing the oven lamp
1. You can find the lamp glass cover at the
back of the cavity.
Turn the lamp glass cover counterclock-
wise to remove it.
2. Clean the glass cover.
3. Replace the oven lamp with applicable
300°C heat-resistant oven lamp.
Important! Use the same oven lamp type.
4. Install the glass cover.
Replacing the oven lamp (left side of the
oven cavity):
1. Remove the left shelf support rail.
2. Use a narrow, blunt object (e.g. a tea-
spoon) to take off the glass cover and
clean it.
3. If necessary replace the oven lamp. Use
the same oven lamp type.
Always use a cloth to take hold of a hal-
ogen lamp to avoid burning on fatty de-
posit.
4. Install the glass cover.
5. Install the left shelf support rail.
Fat trap
Warning! Before you remove the fat
trap deactivate the appliance. Make
sure that the appliance is cold.
There is a risk of burns!