Advertisement
The Infrared portion of the remote control should point to the remote
sensor of the projector for proper remote control operation.
The range of the remote sensor is 18'±5% feet with a 30±10% degree
range.
Do not drop or expose the remote control to physical impact.
Do not get the remote control wet or
Remove the batteries from the remote control and store them in a safe
place if you will not be using the remote control for an extended period.
Remote control show below as the picture:
6
6
-POWER:
-Press this button to turn on the set. Press again to enter
the standby mode.
- MUTE:
-Press this button to silence the sound system. Press again to activate it.
-Numeric Keys (0~9):
-Press these buttons to select the TV channel.
-MENU:
-Access the main menu of the projector or exit the current item.
-IMAGE:
-Select the best display between Bright / Normal / Soft / Optional.
-MODE:
-Select the signal input Video/S-video/VGA.
-OK:
-Image vertical flip.
-
:
- Press this button to jump between two channels.
- CH( +/-):
Change channels sequentially up or down in viewing mode
place it on wet objects.
Advertisement
