Acomdata Hard Drive Enclosure User Manual page 42

into Sleep mode. The immediate solution is to restart your
computer. To prevent this problem from reoccurring, go
into your Power Settings/Energy Saver and set it to where it
never goes into Sleep mode.
The Drive feels warm when it's powered on.
A: When in operation, the Drive may feel quite warm to the
touch. This is normal.
The Drive gives me a "Device cannot start. Code (10)."
A: This is a power issue. Make sure your connections are
secure. The other possibility is that the Drive has malfunc-
tioned and requires service.
I don't see the Drive in My Computer, but it does appear in
Device Manager. (Windows XP & 2000 only)
A: Right-click on My Computer. Select Manage in the
pop-up menu. In the Computer Management window,
select Storage, then select Disk Management. In the Disk
Management window, you should see a list of available stor-
age devices. Look for the Disk that has a capacity closest to
your AcomData Drive. Right-click on the right-hand box; in
the pop-up menu select Delete Partition. Once you do this,
it will say "Online" & "Unallocated. " Right-click on the box
and select Create New Partition in the pop-up menu. When
the Partition Wizard appears, select Primary Partition and
click on Next. You will see a default value for the AcomData
Drive; click Next. You will then see a drive letter (you can
change this drive letter if you wish); click Next. You will then
be asked to format the AcomData Drive.
When I try to format my Drive in Windows 2000/XP I get
the message: "Could not complete format."
A: This problem can occur if you are using an expansion
– 42 –