Horizontal Placement; Removing The Stand; Affixing The Rubber Feet To The Drive Case - Acomdata Hard Drive Enclosure User Manual

Horizontal Placement

Removing the stand

Use a screw driver with the proper type and size head to
loosen the two screws located on the underside of the
stand. Loosen the screws just enough so that you can easily
slide the stand out of the groove. Keep the nuts attached to
the screws. Store the stand in a safe place.

Affixing the rubber feet to the Drive case

It is highly recommended you use the supplied rubber
feet for horizontal placement. The feet help keep the Drive
securely in place, and they also prevent the Drive case from
possibly scuffing your desktop.
1. Decide wether you want the Power-Data Light to be
located on the left or right side when the
Drive is in the horizontal position, and
select the appropriate side on which
to affix the feet.
2. Remove one of the rubber feet
from the paper backing and
carefully position the foot
onto the Drive case with
the adhesive side down.
Once the foot is properly
positioned, press down
firmly to secure it in place.
Repeat for the other three
feet.
– 23 –