Acomdata Hard Drive Enclosure User Manual page 19

3. Connect the Drive to the Carrier
1. The Drive/PCB Carrier contains the ATA interface cable
and the power cable., which are attached to the PCB
(printed circuit board). Orient your 3.5" IDE drive so that
the drive's connectors are aligned with the ATA interface
cable and the power cable.
���
2. Plug the ATA interface cable into
the ATA interface connector on
the back of the drive.
3. Plug the power cable
into the drive's power
connector. The
power cable
connector is
shaped so it can
only be inserted
one way.
�������������
�����
������������ �����������
����� ������������
– 19 –
��������� �����
������� ������
�����