Fuse Replacement; Warranty - GE WattStation Wall Mount User Manual

WattStation Wall Mount User Manual
Fan Fault:
WattStation is not suitable for vehicles that require ventilation. It will provide fault
indication if a vehicle requests fan ventilation, as per SAE J1772. The fault indicator will
illuminate and turn solid red. The fault will reset if the user removes the WattStation
connector from the vehicle.

3.6 Fuse Replacement

In the event that a fuse needs to be replaced, de-energize the upstream breaker feeding
this equipment before opening the cover. Remove the front cover as described in Step 4
of Section 2.32. The fuses will then be accessible through the dead front shield. Remove
old fuses by using a fuse puller tool. Replacement fuses should be Cooper-Bussmann
NON-40, Class K5.
4. LIMITED WARRANTY FOR GE WattStation
("this Warranty")

WARRANTY

Any one or more of the following actions acknowledges that you have read and agree to
the terms of this warranty agreement: Your use of the GE WattStation (Wall) packaged
with this Instruction Manual (the "Hardware"), online product registration of the
Hardware, or your return of the enclosed Registration Card. GE's warranty obligations for
this Hardware product are limited to the terms set forth in this Limited Warranty and are
limited by and subject to the Exclusions and Limitations set out below.
GE warrants that this Hardware product shall be free of defects in materials and
workmanship under normal use for a period of three (3) years from the date of
manufacture (the "Warranty Period"). If a defect in the Hardware arises and a valid claim
is received within the Warranty Period, your sole and exclusive remedy will be for GE, in
its sole discretion and to the extent permitted by law, to (1) repair the defect in the
Hardware at no charge, using new parts or refurbished parts, or (2) exchange the
Hardware with new or refurbished hardware that is functionally equivalent to the original
Hardware, (the repaired Hardware and the exchanged hardware are called the
"Remedied Hardware"). Any Remedied Hardware product will be warranted for the
remainder of the original warranty period or ninety (90) days from delivery to the
customer, whichever is longer. In order to receive the remedy set forth above, you must
contact GE during the Warranty Period at 888-437-3765 and provide the model number,
serial number and date of purchase. Upon GE's determination that the Hardware
product should be returned to GE, return the Hardware and include with each returned
item of Hardware (i) a copy of your original purchase invoice or receipt to verify your
warranty; (ii) your name, address, and telephone number; (iii) the Return Materials
Authorization (RMA) number.
13 GE Energy
TM (Wall)
©2011 GE Company All Right Reserved