Turning Wattstation On And Off; Connecting And Disconnecting To Vehicle - GE WattStation Wall Mount User Manual

WattStation Wall Mount User Manual

3.2 Turning WattStation On and Off

WattStation can be turned on by pressing in the On/Off pushbutton. When on, the LED
ring around the connector will glow white.
WattStation can be turned off at any time by pressing the On/Off button again. The LED
ring will turn off.

3.3 Connecting and Disconnecting to Vehicle

Connect to Vehicle
When the connector is seated in the WattStation holder, press and hold the button on the
connector handle and pull away from the holder until it is fully removed.
Press and hold the button on the connector handle and insert into the vehicle's inlet
socket. Release the button on the connector handle when fully connected to the vehicle
inlet socket.
Once the WattStation handle is connected to the vehicle, the charge status indicator will
illuminate green.
Disconnect from Vehicle:
WattStation can be disconnected from the vehicle at any time.
Press and hold the button on top of the connector handle and pull the handle away from
the vehicle inlet socket. The charge status indicator light will turn off.
Replace the connector handle into the WattStation holder by pushing the connector
into the inlet. This will ensure the connector is locked with the metal inlet of the
WattStation holder.
10 GE Energy ©2011 GE Company All Right Reserved