Work Light; Correct Ventilation; Important To Know; Maintenance - Electrolux EFT 500 User Manual

Table of Contents

Advertisement

Work light

The hood has one lamp 40 W (E 14 candle).
Switch on and off with the right slide switch.

Correct ventilation

To have the cooker hood working correctly the
windows in the kitchen should be closed. In stead a
window in an adjacent room should be open.

Important to know

If the hood is run at the same time as a burner or
fireplace that depend on ambient air (for example
gas, Diesel, coal or wood heaters, water heaters,
etc.) be careful, because the hood, when it exhausts
the air, removes the ambient air required by the
burner or fireplace for combustion.
Not valid if the cooker hood is used in
recirculation mode.

Maintenance

Before performing any maintenance
operation, disconnect the hood from
the electricity.

Grease filter

This serves to hold the grease particles in suspen-
sion. The metal filter should be washed every
month with warm soapy water or, if possible, in the
dishwasher (60 C).
Remove the filter:
Rotate the latch to open the grid (Fig. 12).
To remove the grid, pull forward from the left
hand side and unhook.
Release the clips B that stop the filter (Fig. 12).
Leave to dry before refitting it.
Grid must be cleaned as well as the grease filter.

Carbon filter

This filter dissolves cooking odours.
It should be changed every 4-5 months in normal
use. Ask the technical assistance service or manu-
facturing company for a new one.
The carbon filter must never be washed.
To remove the carbon filter, rotate anticlockwise
(Fig. 9).
Fig. 11
Fig. 12
23
B
B

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eft 621Eft 721

Table of Contents