Cleaning; Changing The Lighting Elements; If The Hood Does Not Function; Service And Spare Parts - Electrolux EFT 500 User Manual

Attention
Failure to observe the rules for cleaning the appli-
ance and changing and cleaning the filters may
cause fires. Therefore, we recommend observing
these instructions.

Cleaning

To clean the outside of the hood use a cloth mois-
tened with denatured alcohol or neutral liquid
detergents. Never use products containing
abrasives.

Changing the lighting elements

Disconnect the hood from the electricity.
Open the grid (Fig. 12).
Replace the damaged part with one of equal
rating.

If the hood does not function

Before you make contact to service
Check that the power plug is connected to the wall
power outlet and that no fuse is blown. Do not do
any operations that can cause hazard or damage to
the product. If the problem remains contact your
dealer or an approved service company
Remember to save the purchase recite and the
Warranty card (only used in some countries)

Service and spare parts

Service and spare parts you will get via your dealer
or service company.
When you order service or spare parts you should
be ready to give the product number and model
denomination. This information you will find on
the rating label.
Take away the grease filter and you will find the
rating label behind.
Model:
Product number:
Date of purchase:
24