Sharp FO-11 Operation Manual page 34

Sending a fax by Rapid Key Dialling
If the number you want to dial has been stored for Automatic Dialling as a
Speed Dial number from 01 to 05, you can dial it by pressing the
corresponding Rapid Key.
1
If you are sending a fax, load the
document(s).
If desired, press
resolution and/or contrast.
2
Press the Rapid Key for the desired Speed Dial number as follows:
Speed Dial 01: Rapid Key A
Speed Dial 02: Rapid Key B
Speed Dial 03: Rapid Key C
Speed Dial 04: Rapid Key D
Speed Dial 05: Rapid Key E
The name of the receiving party will appear in the display. If no name was
stored, the fax number will appear. (If the name or number is incorrect,
STOP
press
The document will be automatically transmitted once the connection is
established.
RESOLUTION/
RECEPTION MODE
to set the
.)
Sending a Fax by Automatic Dialling
READY TO SEND
Example:
A
To dial Speed Dial
number 01, press
Rapid Key A.
33