Sending A Fax By Direct Keypad Dialling - Sharp FO-11 Operation Manual

Sending a fax by Direct Keypad Dialling

You can also enter a full number with the number keys and then press
to begin dialling. You can use this method to dial a full number when you don't
need to speak to the other party before faxing.
1
Load the document(s).
If desired, press
resolution and/or contrast.
2
Enter the number of the receiving machine by pressing the number
keys.
If a pause is required between any of the digits to access a special service
or an outside line, press
seconds per pause). Several pauses can be entered in a row.
3
Check the display. If the number of the receiving machine shown is
correct, press
If the number is not correct, press
at a time, and then re-enter the correct digit(s).
RESOLUTION/
RECEPTION MODE
to set the
REDIAL
. The pause will appear as a hyphen (two
START
.
Sending a Fax by Automatic Dialling
READY TO SEND
STOP
to backspace and clear one digit
START
35