Sharp FO-11 Operation Manual page 2

Introduction
Automatic dialling
Fax paper
Paper cutting method
Memory size*
(FO-51/FO-71 Only)
Modem speed
Transmission time*
Resolution
Automatic document
feeder
Recording system
Halftone (grayscale)
Compression scheme
*Based on Sharp Standard No.1 Chart at standard resolution is Sharp special mode,
excluding time for protocol signals (i.e., ITU-T phase C time only).
Welcome, and thank you for
choosing a Sharp facsimile!
The features and
specifications of your new
Sharp fax are shown below.
Rapid Key Dialling: 5 numbers
Speed Dialling: 35 numbers
Initial starter roll (included with machine):
10 m
Replacement roll (not included):
FO-20PR 30 m (12.7 mm core)
FO-11/FO-51: Tear off by hand
FO-71: Automatic cutter
448 KB (approx. 17 average pages)
9,600 bps with automatic fallback to lower
speeds.
Approx. 15 seconds
Horizontal: 8 pels/mm
Vertical:
Standard: 3.85 lines/mm
Fine /Halftone: 7.7 lines/mm
Super fine: 15.4 lines/mm
5 pages max. (A4, 80 g/m
Thermal recording
64 levels
MR, MH, H2
2
paper)
1