Restoring All The Settings To The Factory Default Settings - Pioneer BDP-150-K Operating Instructions Manual
Hide thumbs
Also See for BDP-150-K:
- Operating instructions manual (60 pages) ,
- Operating instructions manual (52 pages)
Table of Contents
Advertisement
Select and set Options Update Network
4
Start.
Use /// to select, then press ENTER.
5
Updating starts.
Press ENTER.
• Software updating may take a certain period of time.
• When updating is completed, the unit restarts
automatically.
Updating using a USB flash drive/
disc
Note
• When an update file is provided on the Pioneer
website, use your computer to download it onto a
USB flash drive or disc. Carefully read the
instructions on downloading update files provided on
the Pioneer website.
• Store the update file in the root directory of the USB
flash drive or disc. Do not store it within a folder.
• Do not put any files other than the update file on the
USB flash drive or disc.
• To update using a disc, use a CD-R or CD-RW disc.
• This unit supports USB flash drives formatted in
FAT32, FAT16 or NTFS. When formatting a USB flash
drive on your computer, do so with the settings below.
– File system: FAT32
– Allocation unit size: Default allocation size
• Only store the most recent update file on the USB
flash drive or disc.
• Do not use a USB extension cable to connect a USB
flash drive to the player. Using a USB extension cable
may prevent the player from performing correctly.
1
Plug in the USB flash drive or load the disc on
which the update file is stored.
2
When playback is stopped, display the Home
Menu screen.
Press
HOME MENU.
3
Select and set Initial Setup.
Use / to select, then press ENTER.
Select and set Options Update Disc or USB
4
Storage Start.
Use /// to select, then press ENTER.
5
Updating starts.
Press ENTER.
• Software updating may take a certain period of time.
• When updating is completed, the unit restarts
automatically.
Restoring all the settings to
the factory default settings
1
Check that the player's power is turned on.
2
When playback is stopped, display the Home
Menu screen.
HOME MENU.
Press
3
Select and set Initial Setup.
Use / to select, then press ENTER.
Select and set Options Load Default Next
4
Screen.
Use / to select, then press ENTER.
5
Select and set OK.
Use / to select, then press ENTER.
Note
• After restoring all the settings to the factory default
settings, use Setup Navigator to reset the player
(page 24).
07
47
En
Advertisement
Table of Contents
