Table of Contents
Advertisement
Connecting to the
network through LAN
interface
By connecting this player to the network via the LAN
terminal or a wireless LAN, you can play image, audio
and video files stored on the components on the
network, including your computer, using SOURCE
inputs.
Turn on the DHCP server function of your router. In case
your router does not have the built-in DHCP server
function, it is necessary to set up the network manually.
For details, see Setting the IP address on page 43 .
Note
• Refer to the operation manual of the equipment you
have as the connected equipment and connection
method may differ depending on your Internet
environment.
• When using a broadband Internet connection, a
contract with an Internet service provider is required.
For more details, contact your nearest Internet
service provider.
• Please note that Pioneer will accept no responsibility
whatsoever for communications errors or problems
related to the user's network connection environment
or connected devices. Contact your provider or the
manufacturer of your connected devices.
Connecting with a LAN cable
(wired LAN)
Connect the LAN terminal on this receiver to the LAN
terminal on your router (with or without the built-in DHCP
server function) with a straight LAN cable (CAT 5 or
higher).
LAN cable
(commercially
available)
LAN
Computer
(commercially available)
Rear panel
Internet
Modem
Router
3
2
1
WAN
LAN cable
∫ LAN terminal specifications
LAN terminal: Ethernet jack (10BASE-T/100BASE-TX)
Connecting to a wireless LAN
Manual settings must be made to connect to a wireless
LAN. For details, see About how digital audio formats are
output on page 47.
Internet
Computer
Connecting the power
cord
Connect the power cord after all the connections
between devices have been completed.
Rear panel
To wall outlet
Modem
Router
WAN
Power cord
(included)
02
19
En
Advertisement
Table of Contents
