Electrolux EB SL70 User Manual page 22

22 electrolux
1. Press and
until a message appears in the display.
The key lock Child Lock is in operation.
Switching off the Child Lock
1. Press and
until a message appears in the display.
The Child Lock is now deactivated and the
oven is again ready for use.
Oven Automatic cut-out
If not switched off after a certain time, or
3
if the temperature is not modified, the
oven switches off automatically.
A message appears.
The oven switches itself off when the
oven temperature is:
30 - 120°C
120 - 200°C
200 - 230°C
Using the appliance after an automatic
cut-out
Press the key.
Meatprobe
The oven switches itself off when the core
temperature set by you is reached.
Important!: Only the Meatprobe sup-
1
plied may be used. If replacing, please
use only original replacement parts.
Setting Meatprobe core temperature
1. Switch the appliance on with
2. Push the tip of the Meatprobe right into
the meat so that the tip is in the centre
of the meat.
keys at the same time
keys at the same time
after 12.5 hours
after 8.5 hours
after 5.5 hours
.
3. Insert the plug of the Meatprobe as far
as it will go into the socket on the side
wall of the oven.
The window "Meatprobe" is displayed.
4. Within 5 seconds using
desired core temperature.
5. Confirm set core temperature with
6. Select oven function.
The menu for the oven function is displayed.
7. If necessary, set oven temperature.
A provisional end time will be calculated
3
depending on the quantity of food and
the selected oven temperature (at least
120°C) and operating mode. This pro-
cedure can amount to approx. 30 min-
utes and is updated in the display during
the cooking process. The system re-
quires that the Meatprobe is pushed into
the meat and into the socket at the be-
ginning of the cooking process and that
it is not removed during the cooking
process.
As soon as the pre-set core temperature is
reached, a signal sounds.
8. Press any key to switch off the signal.
The Meatprobe can also be set, if an
3
oven function has already been select-
ed.
To subsequently change the core tem-
perature, press
The core temperature is displayed from
3
30°C.
Removing the Meatprobe
Warning: The Meatprobe is very hot.
1
There is a risk of being burned when re-
or set the
.
key.