Oki ES2232a4 User Manual page 54

ITEM SETTINGS
SIDM MENU/ 0 ~ 3 ~ 9
MANUAL2 ID
SIDM MENU/ 0 ~ 4 ~ 9
SIDM MP TRAY
SIDM MENU/ 0 ~ 1 ~ 9
SIDM TRAY1
SIDM MENU/ 0 ~ 2 ~ 5 ~9
SIDM TRAY2
CHANGE
PASSWORD/
NEW
xxxxxxxxxxxx
PASSWORD
CHANGE
PASSWORD/
VERIFY
xxxxxxxxxxxx
PASSWORD
PARTITION nnn%mmm%lll%
SIZE/
PCL/COMMON/
PSE
EXPLANATION
Set up Pn specified MANUAL by
MANUAL-2 ID No.FX/PPR Emu in CSF
control command(ESC EM Pn).
Set up Pn specified TRAYO(MP Tray) by
MP Tray ID No.FX/PPR Emu in CSF
control command(ESC EM Pn).
Set up Pn specified TRAY 1by Tray 1 ID
No.FX/PPR Emu in CSF control
command(ESC EM Pn).
Set up Pn specified TRAY 2 by Tray 2 ID
No.FX/PPR Emu in CSF control
command (ESC EM Pn).
Set a new password for entering the
administrator's menu.
Password should be from 6 to 12 digits
of alpha/numeric characters (or mix)
The default value is "aaaaaa"
The printer will restart after the ADMIN
MENU.
Verification of above.
Sets up the partition size.
nn,mm,ll should be 1~98% and
nn+mm+ll = 100%.
The display for changing partition size
will blink. Press BACK/ENTER button to
confirm changed location. The following
confirmation message will be displayed
by pressing ENTER switch in the last
column.
ARE YOU SURE?
YES/NO
If NO is selected, the display will go
back to the source menu. If YES is
selected, the printer will automatically
reboot. At the same time, the HDD will
change partition size and initialise.
(Changing one partition size
automatically affects other partition
size).
Menu functions > 54