Oki ES2232a4 User Manual page 50

ITEM SETTINGS
OP MENU/ ENABLE
MAINTENCE DISABLE
MENU
OP MENU/ ENABLE
USAGE MENU DISABLE
OP MENU/ ENABLE
JOB LOG MENU DISABLE
CONFIG. ENABLE
MENU/
DISABLE
NEARLIFE LED
FILE SYS EXECUTE
MAINTE1/
HDD
INITIALIZE
FILE SYS EXECUTE
MAINTE1/
PARTITION
SIZE
EXPLANATION
Set up ENABLE/DISABLE condition for
MAINTENACE MENU category.
If DISABLE is selected, MAINTENANCE
MENU category of USERS MENU will not
appear.
Set up ENABLE/DISABLE condition for
USAGE MENU category.
If DISABLE is selected, USAGE MENU
category of USERS MENU will not
appear.
Set up ENABLE/DISABLE condition for
JOB LOG category.
If DISABLE is selected, JOB LOG
category of USERS MENU will not
appear.
Enables/disables illumination of front
panel LED when "near-end-of-life"
warning of a toner, drum, fuser, or belt
occurs.
Attention LED is lit when setting is
enabled, inhibited when disabled.
Initialise the HDD as factory default.
The printer needs to be partitioned and
initialized. The following message
appears after that.
ARE YOU SURE?
YES/NO
If "NO" is selected, the display will go
back to the source menu. If "YES" is
selected, the printer will automatically
reboot and execute HDD initialisation.
Note: This item appears only when a
HDD is installed.
The screen will display the HDD
partition size.
Note: This item appears only when a
HDD is installed.
Menu functions > 50