Oki ES2232a4 User Manual page 43

S A
YS DJUST MENU
Not displayed as default. This menu is displayed only when set
to ENABLE in OP MENU of Administrator menu.
ITEM
X ADJUST
Y ADJUST
DUPLEX X
ADJUST
DUPLEX Y
ADJUST
DRUM
CLEANING
SETTINGS
+2.0mm
~
0
~
-2.0mm
+2.0mm
~
0
~
-2.0mm
+2.0mm
~
0
~
-2.0mm
+2.0mm
~
0
~
-2.0mm
ON
OFF
Menu functions > 43
EXPLANATION
Adjusts the position of a whole print
image in the direction perpendicular to
the direction the paper runs, that is
horizontally, in 0.25 mm increments.
Any parts of the print image that are
outside the printable area as a result of
this shift will be cropped.
Adjusts the position of a whole print
image in the direction the paper runs,
that is vertically, in 0.25 mm
increments.
Any parts of the print image that are
outside the printable area as a result of
this shift will be cropped.
Corrections in a negative value are
ignored in PS mode.
If the Duplex option is installed, when
printing the reverse page of a duplex
job, adjusts the position of the whole
print image in the direction that is
perpendicular to the direction the paper
runs, that is horizontally, in 0.25 mm
increments.
Any parts of the print image that are
outside the printable area as a result of
this shift will be cropped.
If the Duplex option is installed, when
printing the reverse page of a duplex
job, adjusts the position of the whole
print image in the direction the paper
runs, that is vertically, in 0.25 mm
increments.
Any parts of the print image that are
outside the printable area as a result of
this shift will be cropped.
Corrections in a negative value are
ignored in PS mode.
Sets whether to rotate the drum in idle
prior to printing in order to reduce any
horizontal white lines.
CAUTION: Each additional rotation
will shorten the ID life by that
amount.