Oki ES2232a4 User Manual page 41

ITEM
NETWARE
ETHERTALK
FRAME TYPE
IP ADDRESS
SET
IP ADDRESS
SUBNET MASK
GATEWAY
ADDRESS
WEB
TELNET
FTP
SNMP
NETWORK
SCALE
SETTINGS
ENABLE /
DISABLE
ENABLE /
DISABLE
AUTO / 802.2 /
802.3 /
ETHERNET II /
SNAP
AUTO /
MANUAL
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
ENABLE /
DISABLE
ENABLE /
DISABLE
ENABLE /
DISABLE
ENABLE /
DISABLE
NORMAL /
SMALL
Menu functions > 41
EXPLANATION
Enables or disables this network
protocol.
Enables or disables this network
protocol.
Selects the Ethernet MAC layer frame
type.
Specifies whether IP address allocation
is automatic (DHCP) or manually
assigned.
Current assigned IP address. To
change, press ENTER and use +/–
keys to increment 1st octet, then press
ENTER again to move on to next octet.
When 4th octet has been set, press
ENTER again to register new address.
Current assigned subnet mask. To
change, proceed as above.
Current assigned gateway address. To
change, proceed as above.
Enables or disables Web config. facility.
Enables or disables Telnet config.
facility.
Enables or disables communication via
FTP.
Enables or disables SNMP protocol.
Selects network size.
When NORMAL is selected, printer can
work effectively, even when connected
to a HUB that has a spanning tree
feature. However, printer start up time
gets longer when computers are
connected with two or three small
LANs.
When SMALL is selected, computers
can cover from two or three small LANs
to a large LAN, but may not work
effectively when connected to a HUB
that has a spanning tree feature.