Oki ES2232a4 User Manual page 35

ITEMS
JAM RECOVERY
ERROR REPORT
PCL
EMULATION
This menu controls settings effective when the printer is
operating in PCL emulation mode.
ITEMS
FONT SOURCE
FONT No.
FONT PITCH
FONT HEIGHT
SYMBOL SET
SETTINGS
ON
OFF
ON
OFF
SETTINGS
RESIDENT /
RESIDENT2
DOWNLOADED
I0/ C001 /
S001
0.44CP!~
10.00CPI~
99.99CPI
4.00
POINT~12.00
POINT~999.75
POINT
PC-8
(Default Symbol
Set only shown)
Menu functions > 35
EXPLANATION
Specifies whether the printer should
perform jam recovery after a paper jam
has occurred. If ON, the printer will
attempt to re-print any pages lost due
to a paper jam once the jam has been
cleared.
If ON, the printer will print error details
when a PostScript Emulation error
occurs.
Note: Applies to PS & PCL XL only.
EXPLANATION
Specifies the location of the PCL default
font. Normally this will be INTERNAL
unless additional fonts are installed in
the expansion ROM slot or additional
fonts have been downloaded to RAM as
permanent fonts.
Sets the current default font number
from the currently selected source,
which could be internal (I), ROM slot
(C) or downloaded (S).
Sets the width of the PCL default font in
characters/inch (CPI).
Default font is the fixed-pitch, scalable
font. The value is displayed to the
second decimal place
Displayed only when the font selected
in Font No. is fixed-spacing, scalable
font.
Point size of selected font.
The value is displayed to the second
decimal place
PCL symbol set. If the font source and
number are changed to one which does
not support the selected symbol set,
this must be changed to an available
symbol set for that font.