Set Password - Abit SL6 User Manual

BIOS Setup
When you press <Enter> on this item you get a confirmation dialog box with a message
similar to:
Pressing 'Y' loads the default values that are factory settings for optimal performance
system operations.

3-11. Set Password

Set Password: Can enter but do not have the right to change the options of the setup
menus. When you select this function, the following message will appear
at the center of the screen to assist you in creating a password.
Type the password, up to eight characters in length, and press <Enter>. The password typed
now will clear any previously entered password from CMOS memory. You will be asked to
confirm the password. Type the password again and press <Enter>. You may also press
<Esc> to abort the selection and not enter a password.
To disable a password, just press <Enter> when you are prompted to enter the password. A
Load Optimized Defaults (Y/N) ? N
Figure 3-16. Set Password Screen Shot
ENTER PASSWORD:
3-47
User's Manual