Abit SL6 User Manual page 23

Installing the Motherboard
PIN Name Significance of signal
PIN 1 +5VDC
PIN 2 No connection
PIN 3 Ground
PIN 4 No Connection
PIN 5 No Connection
PN1
PIN6 Empty Pin
PIN 7 LED Power
PIN 8 HDD active
PIN 9 Empty Pin
PIN 10 Ground
PIN 11 Power On/Off
PIN 12 Empty Pin
PIN 13 Ground
PIN 14 Suspend signal
Let's now see the I/O connectors that the SL6 uses, and what their functions are.
(11) FDC1 Connector
connecting the single end to the FDC1, connect the two connectors on the other end to the
floppy disk drives. In general, people only install one floppy disk drive on their computer
system. The end attached to the longer length of ribbon should be attached to the
motherboard connector.
Table 2-3. PN1 and PN2 pin count name list
PIN Name Significance of signal
PIN 1 Ground
PIN 2 Reset input
PIN 3 Empty Pin
PIN 4 No Connection
PIN 5 +5 VDC
PN2
PIN6 Ground
PIN 7 Ground
PIN 8 Empty Pin
PIN 9 Speaker Data
PIN 10 No Connection
PIN 11 Empty Pin
PIN 12 No connection
PIN 13 No connection
PIN 14 No connection
This 34-pin connector is called the "floppy
disk drive connector". You can connect a
360K, 5.25", 1.2M, 5.25", 720K, 3.5'',
1.44M, 3.5" or 2.88M, 3.5" floppy disk
drive. You can even connect a 3 Mode
floppy disk drive (a 3 1/2" drive used in
Japanese computer systems).
A floppy disk drive ribbon cable has 34
wires and two connectors to provide the
connection of two floppy disk drives. After
2-13
User's Manual