Pc Health Status - Abit KN9S User Manual

3.8 PC Health Status

Shutdown Temperature
CPU Warning Temperature
FAN Fail Alarm Selectable
CPU FANEQ Control
- FanEQ Target Temperature
- FanEQ Temp. Tolerance
- FanEQ Start Control
- FanEQ Stop Control
CPU Temperature
System Temperature
PWM Temperature
CPU FAN Speed
SYS FAN Speed
AUX1 FAN Speed
AUX2 FAN Speed
CPU Core Voltage
DDRII Voltage
ATX +3.3V
DDRII VTT Voltage
PCIE Voltage
ATX +12V
ATX +5V
↓↑→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values
Shutdown Temperature
You can set the processor shutdown temperature here. If the processor temperature exceeds
the settings value, system will force to shutdown to protect the processor not overheat.
CPU Warning Temperature
This item lets you select the temperature at which you want the system to send out a warning
message to the PC speakers of when the temperature goes beyond either limit. You can select
the temperatures you want.
FAN Fail Alarm Selectable
This item selects the fan that will be monitored for malfunction.
CPU FANEQ Control
This item allows you to control the CPU fan speed. When set to [enabled], the following items
become selectable.
- FanEQ Target Temperature
This item allows you to set a wanted temperature for the CPU.
- FanEQ Temp. Tolerance
This item sets the high/low limits of the target temperature.
3-20
Phoenix – AwardBIOS CMOS Setup Utility
PC Health Status
95°C/203°F
80°C/176°F
CPUFAN1
Enabled
F6: Fail-Safe Defaults
55°C/131°F
5°C/ 41°F
80%
50%
42°C/107°F
30°C/100°F
42°C/107°F
3245 RPM
0 RPM
O RPM
O RPM
1.42 V
2.10 V
3.30 V
1.00 V
1.50 V
12.00 V
5.00 V
Item Help
F7: Optimized Defaults
KN9 SLI, KN9 Ultra, KN9S