A-4
H/W Reset connector:
and 2. Insert the two-threads hardware reset connector into the correct pins of
connector on the mainboard.
Pin number
1
2
Installing speaker connector:
for pin 11 to pin 14. Connect the four-threads speaker cable to the correct pins
of connector on the mainboard
Pin number
11
12
13
14
Installing Turbo LED connector:
orientation for pins 8 and 9. Connect the two-threads connector to the correct
pins of connector on the mainboard.
Pin number
9
8
J6 - There is no specific orientation for pins 1
Name of the signal or signification
Ground
Hardware Reset Signal
.
Name of the signal or signification
+5VDC
Ground
Ground
Sound Signal
Name of the signal or signification
Anode terminal of Turbo LED
Cathode terminal of Turbo LED
J6 - There is no specific orientation
J6 - There is not specific
Appendix A