Abit KG7-RAID User Manual page 57

Introducing the BIOS 3-29
! IRQ8 (RTC Alarm): The default setting is Disabled.
! IRQ9 (IRQ2 Redir): The default setting is Enabled.
! IRQ10 (Reserved): The default setting is Enabled.
! IRQ11 (Reserved): The default setting is Enabled.
! IRQ12 (PS/ 2 Mouse): The default setting is Enabled.
! IRQ13 (Coprocessor): The default setting is Enabled.
! IRQ14 (Hard Disk): The default setting is Enabled.
! IRQ15 (Reserved): The default setting is Disabled.
VGA:
Two items available: Off or On. The default setting is Off. When set to On, any event occurring at a VGA
port will awaken a system that has powered down.
LPT & COM:
Four items are available: None ) LPT ) COM ) LPT/COM. The default setting is LPT/COM. When
set to LPT/COM, any event occurring at a LPT (printer) /COM (serial) port will awaken a system that has
powered down.
HDD & FDD:
Two items are available: Off or On. The default setting is On. When set to On, any event occurring at a
hard disk drive or floppy drive port will awaken a system that has powered down.
PCI Master:
Two items are available: Off or On. The default setting is Off. When set to On, any event occurring at PCI
Master signal will awaken a systemthat has powered down.
User's Manual