Abit IS-10 User Manual page 54

3-12
Serial ATA Port1 Mode / Serial ATA Port2 Mode
This item determines the function mode for Serial ATA Port 1 (i.e. The SATA1
connector in this model) and Serial ATA Port 2 (i.e. The SATA2 connector in this
model). Both SATA1 and SATA2 will be served each as one single IDE connector
after selected as the following modes:
Serial ATA Port 1
Mode
(SATA1)
IDE-3 Master
Enhanced
IDE-4 Master
IDE-1 Master
IDE-1 Slave
Combined
IDE-2 Master
IDE-2 Slave
Logical IDE-1
SATA
Only
Logical IDE-2
IS-10 / IS-11 / IS-12
Serial ATA Port
2 (SATA2)
IDE-4 Master
IDE-3 Master
IDE-1 Slave
IDE-1 Master
IDE-2 Slave
IDE-2 Master
Logical IDE-2
Logical IDE-1
Description
• SATA1 serves as IDE-3 Master
• SATA2 serves as IDE-4 Master
• OnChip IDE-1 and IDE-2 controller
enabled
• SATA1 serves as IDE-4 Master
• SATA2 serves as IDE-3 Master
• OnChip IDE-1 and IDE-2 controller
enabled
• SATA1 serves as IDE-1 Master
• SATA2 serves as IDE-1 Slave
• OnChip IDE-1 controller disabled
• SATA1 serves as IDE-1 Slave
• SATA2 serves as IDE-1 Master
• OnChip IDE-1 controller disabled
• SATA1 serves as IDE-2 Master
• SATA2 serves as IDE-2 Slave
• OnChip IDE-2 controller disabled
• SATA1 serves as IDE-2 Slave
• SATA2 serves as IDE-2 Master
• OnChip IDE-2 controller disabled
• SATA1 serves as IDE-1 Master
• SATA2 serves as IDE-2 Master
• OnChip IDE-1 and IDE-2 controller
disabled
• SATA1 serves as IDE-2 Master
• SATA2 serves as IDE-1 Master
• OnChip IDE-1 and IDE-2 controller
disabled
Chapter 3