ETH Interface
To remove a currently configured ATM Interface, Click the remove checkbox corresponding to the chosen interface and click
Remove.
To Add a new Interface, click the add button and select the appropriate configuration options as shown below:
PARAMETER
ETH Port
Connection Mode
Click Apply/Save to save the new Interface.
YML604X
www.netcommwireless.com
NB604N – ADSL2+ Wireless N300 Modem Router
Select the Ethernet port to apply the configuration to.
Select the connection mode.
(VLAN MUX is typically used to access services such as IPTV)
DEFINITION
NetComm NB604N – ADSL2+ Wireless N300 Modem
20
Router