Denon AVR-2112CI Owner's Manual page 62

5
o p
Use to select the
FRQ¿JXUDWLRQ RI WKH FRQQHFWHG
speakers.
NORMAL Select the "NORMAL" setting to perform
7.1-channel playback using the surround back
speakers.
ZONE2 Select the "ZONE2" setting to assign the unit's
built-in power amplifier for ZONE2 and output the
audio in stereo.
Bi-AMP Select the "Bi-AMP" setting to connect the front
speakers via the bi-amp connection.
Front B Select the "Front B" setting to use the second set
of front speakers for playback.
F.HEIGHT Select the "F.HEIGHT" setting to use the front
height speaker for playback.
6
RETURN B
Press to exit the "Amp Assign" setting.
7
Set up "Channel Select"
ui
Use to select "Channel Select", and then press
ENTER
.
Audyssey Auto Setup
Preparation
Set the following items
if necessary.
Amp Assign
Channel Select
Auto Setup Start
[ENTER] Enter [RETURN]
Channel Select
Subwoofer Measure
[RETURN] Return
8
ui
Use to select a channel.
Front Select for setting the front speakers to be used. In this
case, go to step 9.
"Front" can be set when "Amp Assign" is set to
"Front B".
Subwoofer Select for no subwoofer to be used. In this case, go
to step 10.
Surround
Select the number of surround back speakers to be
Back
used. In this case, go to step 11.
"Surround Back" can be set when "Amp Assign" is
set to "NORMAL".
59
9
o p
Press to select a front speaker.
A Select this to use front speaker A.
B
Select this to use front speaker B.
A+B Select this to use front speakers A and B simultaneously.
MultEQ XT
10
o p
Use to set whether or not a subwoofer channel
is measured.
Measure Set for measuring a subwoofer.
Skip Set for no measuring of a subwoofer.
11
o p
Cancel Use to set whether or not a surround back
channel is measured.
Measure
Set for measuring two surround back speakers.
(2 sp)
Measure
Set for measuring a surround back speaker.
(1 sp)
Set for no measuring of a surround back speaker.
Skip
12
RETURN B
Press
Proceed to page 16
NOTE
After performing Audyssey ® Auto Setup, do not change the speaker
connections or subwoofer volume. In event of a change, perform
Audyssey ® Auto Setup again.
Set up speakers
.
STEP1 Preparation step 6.