Denon AVR-2112CI Owner's Manual page 105

Setting items
Component RCA
(Component video) None : Do not assign a component video input connector to the selected
Set this to change the input source.
component video input
At time of purchase, the settings of the different input sources are as
connectors assigned to the
shown below.
input sources.
Input source
BD DVD TV
SAT/CBL GAME1
Default
setting
GAME2 V.AUX DOCK
Input source
Default
setting
An input source to which an component video input connector cannot be
assigned is displayed as "– – –".
When a control dock for iPod is connected, signals cannot be assigned to
the component video connectors.
Default Yes : Reset to the defaults.
The "Input Assign" settings No : Do not reset to the defaults.
are returned to the default
If you select "Default" and press
settings.
message "Return settings to the default?"
is displayed. Select "Yes" or "No", and then
ENTER
press
Setting details
BD DVD TV
None None None
GAME1 GAME2 V.AUX
None None None
ENTER
, the
.
Video
Set the source video.
z "BD", "TV", "GAME1" or "GAME2" can be set when "HDMI"
(vpage 102) has been assigned.
Setting items
Video Select
SAT/CBL
Video of another input
source is played back
RCA
combined with the playing
audio.
DOCK
None
Video Mode
Make settings for video
processing.
z z
BD DVD TV
GAME1 z
SAT/CBL
GAME2 z V.AUX
DOCK
102
Default settings are underlined.
(vpage
Setting details
SOURCE : Play the picture and sound of the input source.
BD / DVD / TV / SAT/CBL / GAME1 / GAME2 / V.AUX / DOCK : Select
video input source to view. This can be set for individual input sources.
"BD", "TV", "GAME1" and "GAME2" can be selected only when a
component video is assigned as an input source.
NOTE
It is not possible to select HDMI input signals.
Input sources for which "Delete" is selected at "Source Delete"
(vpage 95) cannot be selected.
Auto : Process video automatically based on the HDMI content
information.
Game : Always process video appropriate for game content.
Movie : Process video normally.
If "Video Mode" is set to "Auto", the mode is switched according to the
input contents.
If a source is played in both MAIN ZONE (audio and video) and ZONE2
(audio only) modes in the same room, audio in MAIN ZONE and ZONE2
modes may sound out of synchronization, but this is not malfunction. In
this case, setting to "Game" mode may improve audio synchronization.
Input Setup
101) or "Component"