Denon AVR-2112CI Owner's Manual page 106

Input Mode (Audio)
The input modes available for selection may vary depending on the input source.
Setting items
Input Mode Auto : Automatically detect input signal and perform playback.
Set the audio input modes HDMI : Play only signals from HDMI input.
for the different input Digital : Play only signals from digital input.
sources. Analog : Play only signals from analog input.
It is normally recommended
to set the audio input mode
"HDMI" can be set for input sources for which "HDMI" is assigned at
to "Auto".
"Input Assign" (vpage 101).
"Digital" can be set for input sources for which "Digital" is assigned at
"Input Assign" (vpage 101).
If the input source is set to "TV", "GAME1" or "GAME2", it cannot be
set to "Analog".
When digital signals are properly input, the
the display. If the
connector assignment and the connections.
If "HDMI Control" is set to "ON" and a TV compatible with the ARC is
connected via the HDMI MONITOR connectors, the input mode whose
input source is "TV" is fixed to ARC.
Decode Mode Auto : Detect type of digital input signal and decode and play automatically.
Set the audio decode mode PCM : Decode and play only PCM input signals.
for input source. DTS : Decode and play only DTS input signals.
BD DVD TV
This item can be set for input sources for which "HDMI" or "Digital" is
SAT/CBL GAME1
assigned at "Input Assign" (vpage 101).
GAME2 V.AUX DOCK
Normally set this mode to "Auto". Set "PCM" and "DTS" when
CD inputting the corresponding input signal.
Default settings are underlined.
Setting details
indicator lights on
indicator does not light, check the digital input
Rename
Change the display name of the selected input source.
Setting items
Rename Up to eight characters can be input.
Change the display name of For character input, see page 76.
the selected input source.
Default Yes : Reset to the defaults.
The input source name No : Do not reset to the defaults.
is returned to the default
If you select "Default" and press
setting.
message "Return settings to the default?"
is displayed. Select "Yes" or "No", and then
press
Source Level (Audio)
This function corrects the playback level of the selected input source's audio input.
Make this setting if there are differences in the input volume levels between the different sources.
–12dB – +12dB (0dB)
The analog input level and digital input level can be adjusted independently for input sources for
which "HDMI" or "Digital" is assigned at "Input Assign" (vpage 101).
103
Setting details
ENTER , the
ENTER
.
Default settings are underlined.
Setting details
Input Setup
vSee overleaf