Master Spas Series Owner's Manual page 48

SPA - CONTROLS: REMINDER MESSAGES
TS 6.1 • TS 67.15 • TS 7.1 • TS 7.15
GENERAL MAINTENANCE HELPS.
Reminder Messages can be suppressed by using the PREF Menu. See Page 41.
Reminder Messages can be chosen individually by the Manufacturer. They may be disabled
entirely, or there may be a limited number of reminders on a specific model.
The frequency of each reminder (i.e. 7 days) can be specified by the Manufacturer.
Press a Temperature button to reset a displayed reminder message.
APPEARS ON A REGULAR SCHEDULE, I.E. EVERY 7 DAYS.
Check pH with a test kit and adjust pH with the appropriate chemicals.
APPEARS ON A REGULAR SCHEDULE, I.E. EVERY 7 DAYS.
Check sanitizer level and other water chemistry with a test kit and adjust with the appropriate
chemicals.
APPEARS ON A REGULAR SCHEDULE, I.E. EVERY 30 DAYS.
Clean the filter media as instructed by the manufacturer. See HOLD on page 39.
APPEARS ON A REGULAR SCHEDULE, I.E. EVERY 30 DAYS.
The GFCI is an important safety device and must be tested on a regular basis to verify
its reliability.
Every user should be trained to safely test the GFCI associated with the hot tub installation.
A GFCI will have a TEST and RESET button on it that allows a user to verify proper GFCI function.
* This message can be reset from the topside panel with any button press.
Alternates with temperature or normal display.
Alternates with temperature or normal display.
Alternates with temperature or normal display.
Alternates with temperature or normal display.
46