Master Spas Series Owner's Manual page 37

SPA - CONTROLS: TEMPERATURE AND TEMP RANGE
TS 6.1 • TS 67.15 • TS 7.1 • TS 7.15
ADJUSTING THE SET TEMPERATURE
When using a panel with Up and Down buttons (Temperature buttons), pressing Up or Down
will cause the temperature to flash. Pressing a temperature button again will adjust the set
temperature in the direction indicated on the button. When the LCD stops flashing, the spa
will heat to the new set temperature when required.
If the panel has a single temperature button, pressing the button will cause the temperature
to flash. Pressing the button again will cause the temperature to change in one direction (e.g.
UP). After allowing the display to stop flashing, pressing the Temperature Button will cause
the temperature to flash and the next press will change the temperature in the opposite
direction (e.g. DOWN).
PRESS-AND-HOLD
If a Temperature button is pressed and held when the temperature is flashing, the tempera-
ture will continue to change until the button is released. If only one temperature button is
available and the limit of the Temperature Range is reached when the button is being held,
the progression will reverse direction.
DUAL TEMPERATURE RANGES
This system incorporates two temperature range settings with independent set temperatures.
The High Range designated in the display by an "up" arrow, and the Low Range designated
in the display by a "down" arrow.
These ranges can be used for various reasons, with a common use being a "ready to use"
setting vs. a "vacation" setting. The Ranges are chosen using the menu structure below. Each
range maintains its own set temperature as programmed by the user. This way, when a range
is chosen, the spa will heat to the set temperature associated with that range.
High Range can be set between 80°F and 104°F.
Low Range can be set between 50°F and 80°F.
See Ready and Rest on Page 36 for additional
heating control information.
Main Screen
Set Temp will Show & Flash
While
temperature
is flashing...
High-Range vs.
Low-Range Temp Choice
Toggle the Range arrows in the LCD.
To next item in Main Menu
Main Screen
Set Temp will Show & Flash
Press a Temp Button repeatedly to change the temperature.
Pressing and holding a Temp Button will also change the temperature.
Main Screen
OR
Approx. 5 sec.
Press a Temp Button repeatedly to change the temperature.
Pressing and holding a Temp Button will also change the temperature.
35
Key
Indicates Flashing or Changing Segment
A temperature button, used for "Action"
Light or dedicated "Choose" button,
depending on control panel configuration
Waiting time - varies depending on function
Main Screen
OR
Approx. 5 sec.
Main Screen
OR
Approx. 5 sec.